ENCAD NovaJet 4, Руководство пользователя

Страница: 30 / 200

User's Guide
2-30 Getting started
4 Press Select, the equals (=) sign will blink. Press the arrow key to ad-
vance to the desired media size, then press Select. The equals (=) sign
stops blinking and the media is loaded. If your media size is not listed, you
will need to select a different media standard, refer to the "Selecting the
media standard" section in Chapter 4.
Moving the carriage
When not in use, the cartridges rest in the service station at the right
side of the printer. This device seals the inkjets to prevent them from
drying out. If power is turned on, always use the Access Cartridges
button on the printer’s front panel to move the carriage away from
the service station so that you can install, change, adjust or clean
the ink cartridges or the service station.
Installing the cutter
You need to install the cutter if you want the printer to automatically
cut the media after printing.
!
Be careful when handling the cutter to avoid injury.
➪ ➪
➪ ➪
➪
To install the cutter
1 Press the Access Cartridges button to move the carriage to the left, out of
the service station.
The cutter fits in the printer on the left side of the carriage. Install the
cutter by inserting it into the carriage.
2 Push the cutter into the slot until it clicks into place.
3 Press the Access Cartridges button to move the carriage back into the
service station. This ensures that the cutter blade is in the home position.