ENCAD NovaJet 4, Руководство пользователя

Страница: 31 / 200

User's Guide
Getting started 2-31
GETTING S
T
AR
TED
➪ ➪
➪ ➪
➪
To remove the cutter
1 Press the Access Cartridges button to move the carriage to the center
of the platen.
2 Press the knife latch down.
3 Pull the cutter out of the carriage.
When the cutter becomes worn, it can cause the carriage to jam or
the media to be cut raggedly. In extreme cases, you might see an
error message stating "Carriage Axis Failure".
You can order replacement cutters from ENCAD by calling
800-45-ENCAD, (619-677-5071) or fax ENCAD at 619-549-7894.
International users can call their local ENCAD sales center.
Filling the ink reservoir (NJP-36 and NJP-50 only)
!
Use of inks other than those supplied by ENCAD will void your printer
warranty.
!
If you are changing ink types, for example, from GA to GO inks, see
Appendix I for changeover instructions.
NJP-36 and NJP-50 support long, uninterrupted printing runs be-
cause of their ink reservoirs, which hold 470 ml of each of four
colors. The ink reservoirs are located at the printer's left side. You
can refill the reservoirs even while printing.
You receive new ink cartridges with each refill kit. To assure good
print quality, replace the cartridge whenever you refill the reservoir.
However, cartridges should also be replaced if they are not firing
properly. Also, when you refill an ink reservoir, you do not need to
drain the reservoir or the ink delivery line.
Your NovaInk Accessory Kit contains the following items: 500 ml
bottle of ink, 20 ml squeeze bottle of ink, a cartridge, pouring cap
and spout.
You may want to save the 500 ml ink bottle and the pouring cap in
case you ever need to drain the ink reservoir and store the ink. Be
sure to thoroughly rinse and dry the ink bottle and cap before storing
it.