Emerson Vilter MicroVission, Руководство по эксплуатации и обслуживанию

Страница: 30 / 116

3 – 6
Section 3 • Main Screen
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.0
Splash Screen
The Splash screen is the dynamic portion of the screen
that will change as the operator navigates through the
MicroVission panel screens.
The Splash screen area displays the status of loaded and
unloaded cylinders through image, progress bar from
0% to 100% via blue gray bar to indicate ratio of loaded
cylinders to total no. of cylinders on compressor, the
configurable parameters as per settings on Page 4 of
Configuration screen and the Menu button. Operator
can navigate to the Menu screen by pressing Menu but-
ton which in turn will allow navigation to other screens
on MicroVission. See Figure 3-7.
Figure 3-6. Warning Pop-up Window
Manual Run Mode Buttons
When operator runs compressor in Manual run mode,
two buttons “+” (plus) and “-” (minus) will be available
on display along both sides of progress bar, See Figure
3-8. The ”+” button & “-“ button will allow the operator
to increase and decrease compressor capacity respec-
tively in pre-defined steps as per No. of Cylinders and No.
of Unloaders settings of Configuration screen.
Figure 3-7. Splash Screen
Figure 3-8. Manual Run
Mode Buttons