Emerson Vilter MicroVission Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 116

background image

3 – 2

Section 3

•

Main Screen

MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.0

Top Status Bar

The standard view of the status bar displays the follow-
ing information. From Left to Right, bar shows Control
Method, Current Run Mode & the difference between
the desired control setpoint and actual value of the pro-
cess variable. See Figure 3-2.
The Top Status Bar also displays the information that re-
quires user attention or intervention. This information is
displayed by highlighting it in different color or by flash-
ing the additional information bars over standard status
bar view.

Standard Bar - Black

The Standard Bar with Black color indicates the condi-
tion where the compressor motor is not running.

Standard Bar - Green

The Standard Bar with Green color displays the informa-
tion that the compressor motor is currently running.
On the Top Status Bar, the information bar in green color
appears with information flashed on it. The Top Status
Bar and one or more information bars alternatively ap-
pears in a sequence.

Information Bar - Black

The Information Bar with Black color displays the opera-
tional modes, which are different than the normal run-
ning condition. For example, the load limit condition.
The compressor is unable to completely load due to
some setpoint conditions, like high motor current. This
is notified on the information bar with black color..

Information Bar - Yellow

The Information Bar with Yellow color displays the alarm
conditions. Alarm conditions do not stop the compres-
sor, but these are alerts to the operator that if they do
not take any corrective action, this can result in a com-
pressor trip.

Information Bar - Red

The Information Bar with Red color displays the infor-
mation that the compressor motor was stopped due to
the condition listed on the Information Bar. Compressor
trips are designed to protect the equipment and any
personnel operating the equipment.

Figure 3-2. Top Status Bar

«
...
24
25
26
27
28
...
»

Содержание Vilter MicroVission





















































































































Отзывы:

Нет отзывов

Похожие инструкции для Vilter MicroVission

Бренд: ABB Страницы: 2

Бренд: GE Страницы: 8

Бренд: Panasonic Страницы: 27

Бренд: Panasonic Страницы: 78

Бренд: Panasonic Страницы: 98

Бренд: NAiS Страницы: 173

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 10

Бренд: Magnescale Страницы: 132

Бренд: Baader Planetarium Страницы: 7

Бренд: Beaphar Страницы: 2

Бренд: Watts Страницы: 2

Бренд: Hanbay Страницы: 18

Бренд: BabySafe Страницы: 24

Бренд: Bartec Страницы: 26

Бренд: Baninni Страницы: 26

Бренд: V2 Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды