31
GB
Installation
Connecting to the water
supply
•
Connect the water hose to the water
tap. Only use the hose that was
supplied with the washing machine
(
fig. 6
).
•
Some models may have one or
more of the following features:
• HOT and COLD (fig. 7)
: This option
allows hot and cold water to be used
to save energy. Connect the grey
hose to the cold water supply
and the red hose to the hot water
supply. The machine can also be
connected to a cold water supply
alone. In this case the start of the
programme may be delayed for a
few minutes for some programmes.
• AQUASTOP (fig. 8)
:
A device that is fitted to the supply
hose and cuts off the water supply
if there is a leak in the hose. If this
happens a red light on panel “
A
”
will indicate that the hose must
be replaced. Unscrew the nut by
pressing down latch “
B
”.
• AQUAPROTECT – SUPPLY HOSE
WITH MONITORING FUNCTION
(fig. 9)
:
If water leaks from the primary inner
hose “
A
” there will be sufficient
water in the transparent container
“
B
” to complete the wash cycle.
When the wash cycle is finished you
should contact the service centre to
order a new hose.
6
1
7
B
A
8
B
A
9
B
A
8
B
A
9
