35
GB
Open the lid
Programme selector in
OFF position (OFF)
•
Press the
START/PAUSE
button to
start your chosen programme.
•
When you have chosen a
programme the selector knob
will not move from the selected
programme until the cycle is
finished.
•
Turn off the washing machine by
turning the selector knob to
OFF
.
START/PAUSE button
•
Press to start the chosen
programme.
ADDING OR REMOVING A GARMENT
AFTER A PROGRAMME HAS
STARTED (PAUSE)
•
Press and hold the
START/PAUSE
button for around
2 seconds
(a
light will flash together with the
remaining time display, to show
that the washing machine has been
paused).
•
Wait
2 minutes
until the lid safety
lock has been released.
•
When you have added or removed
the garment, close the lid and
press the
START/PAUSE
button to
resume the programme.
INTERRUPTING A PROGRAMME
•
To break off a programme, turn the
selector knob to the OFF position.
DELAY START button
•
This button lets you preselect a
wash programme and delay the
start for up to 24 hours.
•
To delay the start, do as follows:
– Select the desired programme.
– Press the button once to turn on the
delay function (
h00
appears on the
display), then press it again to set
a delay of
1 hour
(
h01
appears on
the display). The delay is extended
by
1 hour
every time you press
the button, up to a maximum of 24
hours, when
h24
appears on the
screen. If you press the button again
the delay is reset to zero.
– Confirm the setting by pressing
the
START/PAUSE
button. The
countdown begins, and when it has
run out the programme will start
automatically.
Controls and programmes
A safety device prevents the lid from
being opened as soon as a programme
ends. After the wash cycle has ended,
wait 2 minutes for the door lock light to
go out before opening the lid.
When you turn the programme selector, the
display lights up to show the settings for the
programme you selected. To save energy,
the display contrast will be reduced at the
end of a cycle or if there is a long period of
inactivity.
NOTE: To turn off the washing machine,
turn the programme selector to the OFF
position.
You must turn the programme selector
back to the OFF position at the end of
each programme, before you can select
and start the next programme.
Close the lid BEFORE you press the
START/PAUSE button.
It may take a few seconds for the washing
machine to start working after you press
the START/PAUSE button.
Make sure the water level is below the
drum opening before you open the drum.