elsner elektronik KNX AQS TH-B-UP Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 56

background image

26

Parameter setting

Sensor KNX AQS/TH-B-UP

• as of software 3.1 • Version: 01.03.2017 • Technical changes and errors excepted.

5.5.

Temperature PI control

For an adequate regulation of the indoor temperature, comfort, standby, eco and build-
ing protection modes may be used.

Comfort

when present,

Standby

during short absences,

Eco

as a night-time mode and

Frost/heat protection

(building protection) during longer absences.

The settings for the temperature control include the set point temperatures for the in-
dividual modes. Objects are used to determine which mode is to be selected. A change
of mode may be triggered manually or automatically (e.g. by a timer, window contact).

The

mode

may be switched with two 8 bit objects of different priority. Objects

"... HVAC mode (Prio 2)" for switching in everyday operation and
"... HVAC mode (Prio 1)" for central switching with higher priority.
The objects are coded as follows:

Alternatively, you can use three objects, with one object switching between eco and
standby mode and the two others are used to activate comfort mode or frost/heat pro-
tection mode. The comfort object then blocks the eco/standby object, and frost/heat
protection objects have the highest priority. Objects
"... Mode (1: Eco, 0: Standby)",
"... comfort activation mode" and
"... frost/heat protection activation mode"

Select the mode to be activated after reset (e.g. power failure, reset of the line via the
bus). (Default).
Then configure a block of the temperature control by the blocking object.

Switching output sends on change and
periodically

Send switching output status

Switching output sends on change to 1 and
periodically

If switching output = 1



send 1

Switching output sends on change to 0 and
periodically

If switching output = 0



send 0

ID

Name

Encoding

Range

Use

20,102

DPT_HVACMode

field1 = HVACMode
0 = Auto
1 = Comfort
2 = Standby
3 = Economy
4 = Building Protection

[0 … 4]

HVAC

Switch mode via

• two 8-bit objects (HVAC modes)
• three 1-bit objects

«
...
25
26
27
28
29
...
»

Содержание KNX AQS TH-B-UP

























































Отзывы:

Нет отзывов

Похожие инструкции для KNX AQS TH-B-UP

Бренд: YOKOGAWA Страницы: 12

Бренд: ABLE Страницы: 20

Бренд: Xerox Страницы: 2

Бренд: AirTest Страницы: 4

Бренд: Flymo Страницы: 24

Бренд: Kingpin Страницы: 4

Бренд: Miller Страницы: 18

Powerbridge TSV

Бренд: Fishman Страницы: 2

Бренд: Prorack Страницы: 14

Бренд: Temposonics Страницы: 25

Бренд: Enviro Страницы: 37

Fresh Express Mov'

Бренд: Moulinex Страницы: 40

Бренд: TecnoVideo Страницы: 4

Бренд: Waeco Страницы: 168

Бренд: Quadratec Страницы: 8

TroyLee Designs

Бренд: A3 HELMET Страницы: 244

Бренд: Hach Страницы: 52

Бренд: Element14 Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды