manualshive.com logo in svg

Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Поделиться
Скачать
Elo TouchSystems DOS and Windows Driver Disk Скачать руководство пользователя страница 69

64

Chapter 6 - MonitorMouse for Windows

Elo Wallpaper

ELO.BMP can be used to display Elo "wallpaper" when giving demos of
MonitorMouse for Windows. To load, click on Control Panel, select Desktop,
Wallpaper, and enter ELO.BMP. Select Tile.

R

UNNING 

DOS P

ROGRAMS FROM 

W

INDOWS

DOS programs run from Windows may also use the touchscreen. However, the
procedures are slightly different in Standard and Enhanced Modes.

If you are running Windows in Enhanced Mode, you may get warning messages
when you run multiple DOS programs that use ELODEV or MonitorMouse for
DOS, saying there is a contention over a LPT or COM port. To prevent these
messages, run Control Panel, select 386 Enhanced, Device Contention, and select
Never Warn for the contending device.

Running DOS Mouse-Driven Programs

MonitorMouse for DOS will automatically be enabled so you can use the
touchscreen with DOS programs run from Windows that use MOUSE.COM. (See
Coordinates vs. Mickeys, page 42, for restrictions.) An ELOGRAPH.CAL file can
be used to keep the touchscreen calibrated in all video modes used by the DOS
programs. See Calibrating in Multiple Video Modes (ELOGRAPH.CAL), page 36,
and the Calibration File Directory Flag (-d), page 49.

In Enhanced Mode, each DOS session may use a different mouse button
emulation mode (specified with the -m flag). In Standard Mode, changing the
mouse button emulation mode affects all DOS mouse-driven programs.

Running DOS ELODEV-Based Programs

DOS programs that use ELODEV, such as ELODEMO, may be run from
Windows. Even programs that use TouchBack may be run from Windows.

In Enhanced Mode, ELODEV-based programs may be run directly. In Standard
Mode, another copy of ELODEV must first be loaded and calibrated within the
DOS session. Otherwise you will get a message saying ELODEV was not found.
MonitorMouse for Windows hides ELODEV in Standard Mode because
ELODEV is not multi-tasking. By loading another copy in each DOS session that
requires it, ELODEV-based programs and Windows programs can all share the
touchscreen.

Содержание DOS and Windows Driver Disk







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды