Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Страница: 62 / 134

Installation 57
These files are copied to your hard disk by the INSTALL program described in
Chapter 2. ELOCALW.CPL and ELOCALW.HLP are included in English,
French, Spanish, and German.
DOS Mouse Driver
A DOS mouse driver (MOUSE.COM, MOUSE.SYS or compatible) is required if
you wish to use your mouse along with the touchscreen in Windows. While
Windows does not typically require a DOS mouse driver for mouse operation, the
MonitorMouse for Windows touchscreen driver requires it to allow any brand of
mouse to be used along with the touchscreen. Later, if you change brands of
mouse, you will not have to change your Windows setup, only load a different
MOUSE.COM.
The DOS mouse driver must be compatible with the Microsoft mouse driver
version 8.2 or later. A suitable MOUSE.COM from Microsoft may be found in
your DOS directory. It may also be found on your Windows 3.1 disks, although in
a compressed form. See the README.MMW file on the DOS and Windows
Driver Disk for information on de-archiving this Microsoft driver.
Hardware Mouse Cursor
If you have a video board that has hardware mouse cursor capability, and are
using a Microsoft Mouse driver version 7.03 or later, you must disable the
hardware cursor since it is not supported by Windows. When loading
MOUSE.COM, typically in AUTOEXEC.BAT, specify the /y option.
MonitorMouse for DOS
MonitorMouse for Windows requires that MonitorMouse for DOS is operating
properly (see Chapter 5). The Tutorial program can be used to verify the operation
of MonitorMouse for DOS (see page 53).