Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Страница: 118 / 134

ELODEV Error Messages 115
Controller not responding.
Controller is not responding to the software setup sequence. Check the
cabling and the baud rate of the controller.
Controller not responding correctly.
Controller is responding, but not correctly, to the software setup sequence.
Check the controller's baud rate.
ELODEV already installed.
You tried to install ELODEV when it is already present. To install
multiple copies of ELODEV, specify a different software interrupt (-i flag)
for each copy. To update the flags of an installed copy, specify only the
flags on the command line. Do not specify the controller information.
ELODEV cannot be extracted.
Another program loaded after ELODEV is preventing its extraction. Try
extracting TSR's loaded after ELODEV first.
ELODEV not installed.
You tried to extract ELODEV from memory, or to update its flags. You
may have specified an incorrect software interrupt if ELODEV is installed
at an interrupt other than the default.
ELODEV in use.
You tried to extract ELODEV, but another TSR loaded after ELODEV is
still using it. Try extracting the other TSR first (such as
MONMOUSE.COM).
Flags not updated.
You tried to update a flag that cannot be updated. Extract ELODEV and
reinstall it with the new flag.
Invalid baud rate.
The baud rate must be 110, 150, 300, 600, 1200, 2400, 4800, 9600,
19,200, or 38,400. ELODEV will accept a baud rate from this list even if
the specified controller does not support it, allowing the use of compatible
controllers which do support the baud rate.