manualshive.com logo in svg

Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Поделиться
Скачать
Elo TouchSystems DOS and Windows Driver Disk Скачать руководство пользователя страница 120

ELODEV Error Messages

117

Invalid syntax.

An argument on the command line was missing or not as expected.
Usually a comma was expected. If you specified a COM port of 0, no baud
rate should be specified. If using a Micro Channel controller, you should
not specify a Base I/O Port or Interrupt (IRQ).

Invalid translation range.

Six signed decimal values must be specified (-r flag).

Invalid wait time flag.

The Untouch Wait Time (-w flag) must be less than 500 (decimal).

Invalid XY swap flag.

The swap flag (-s) must be + or -.

System does not have a Micro Channel bus.

You have specified a Micro Channel controller on a system that is not a
PS/2 or compatible with a Micro Channel bus.

System does not have a PC-Bus.

You have specified a PC-Bus controller on a system that has a Micro
Channel bus.

Touchscreen fault -- controller is transmitting continuously.

The controller should be transmitting only when you touch the
touchscreen. You have a hardware problem. See the IntelliTouch Product
Manual or the AccuTouch Product Manual as appropriate for additional
troubleshooting information.

Содержание DOS and Windows Driver Disk







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды