manualshive.com logo in svg

Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Поделиться
Скачать
Elo TouchSystems DOS and Windows Driver Disk Скачать руководство пользователя страница 21

Where to Go from Here

13

The displayed image can also be tilted. Even changing video modes can affect the
screen size.

Perfect calibration cannot be achieved in all circumstances. For example, the user
can encounter parallax problems with a change in position, or because the present
user is not the same stature as the person who calibrated the screen.

Even the most sophisticated calibration techniques can only partially overcome
such variations. Therefore, most touchscreen software uses only a two or three-
point calibration sequence and relies instead on well placed touch zones and
appropriate user feedback.

The three-point calibration sequence used by Elo automatically corrects inverted
touchscreen installations and backwards cable connections. X or Y-axis inversion
is normal for most touchscreens.

When Recalibration is Necessary

Once calibrated, the touchscreen will be ready to run automatically each time the
system is restarted. Recalibration should only be necessary after moving or
resizing the video image, or after changing either the touchscreen, controller, or
monitor.

Type "DEMOCAL" or click on Calibrate in the Windows Touchscreen Control
Panel to re-run the calibration sequence.

W

HERE TO 

G

O FROM 

H

ERE

If you chose:

DOS Express Installation

Proceed to Chapter 3 for information on
running the demonstration program.
Then see Chapter 5 if you will be using
the MonitorMouse for DOS mouse
emulator or Chapter 7 for the
TouchBack driver.

Windows Express Installation

Skip to Chapter 6 for information on
MonitorMouse for Windows, the
Windows mouse emulator.

Selective Installation

See Chapters 3-7 as appropriate.

If you will doing software development under DOS, see the DOS Programmer's
Toolkit, available separately from Elo.

Содержание DOS and Windows Driver Disk







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды