Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Страница: 45 / 134

38 Chapter 4 - DOS Touchscreen Driver and Calibration Utility
Help Flag (-h)
Type:
ELOCALIB -h
to display quick reference information on all flags and the current version of
ELOCALIB.
Examples
ELOCALIB Provides a menu of video modes to calibrate in (see
Figure 4-1, page 35). You are prompted to save the
points in a calibration file and/or update your
AUTOEXEC.BAT file.
ELOCALIB -m13 -s- -u- -q Calibrates ELODEV for video mode 13 hex only
and does not save the points in a calibration file,
does not update AUTOEXEC.BAT, and does not
wait for a keypress before calibration begins.
ELOCALIB -m3,13 -s+ Calibrates in modes 3 and 13 hex and saves the
points in ELOGRAPH.CAL in the current directory.
ELODEV is calibrated in the last mode listed with
the -m flag. You will be prompted to update
AUTOEXEC.BAT.
ELOCALIB -c10 Calibrates a loaded ELODEV for video mode 10
hex with the points found in ELOGRAPH.CAL in
the current directory.
Calibration Point Ordering
After the touchscreen has been calibrated, ELOCALIB displays the calibration
points in the order XLow, XHigh, YLow, YHigh, ZLow, ZHigh. The Z values are
constants defined in the ELOCALIB source code but may be manually changed to
set a sensitivity range (see Z-Axis Calibration, page 30).
These six points are the same points required by the ELODEV -c flag. If the
proper video mode is calibrated, these points will be consistent with
MonitorMouse for Windows, MonitorMouse for OS/2, and MonitorMouse for
Windows NT.