manualshive.com logo in svg

Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Поделиться
Скачать
Elo TouchSystems DOS and Windows Driver Disk Скачать руководство пользователя страница 30

Running ELODEMO

23

Untouch Mode outputs two points for each touch—once when first touched, and
once on untouch.

For more information on programming, see the DOS Programmer's Toolkit,
available separately from Elo.

Jigsaw Puzzle

Solve a jigsaw puzzle.

Slide each piece into place. An audio signal indicates it is locked into its correct
position. You may slide pieces on top of each other if you wish. Pieces cannot be
rotated.

Touch Windows

This demo shows how windowing software can be implemented using a
touchscreen.

Touch any of the overlay activation zones, labeled "Ovly1 - Ovly10". Each causes
an overlay to appear. Multiple overlays are stacked. When an overlay is "opened",
its "icon" disappears. Overlays are removed and returned to icon form by pressing
"HIDE".

Overlays can be moved by touching their "MOVE" zone and sliding. You can also
move them by touching their left, right, or bottom edges and sliding.

Overlays underneath can be brought to the top of the stack by moving them until
part of the "TOP" zone is visible, and then touching that zone.

Within the overlay, there are three zones which make different tones. Slide your
finger up and down over these zones. The selection is made on untouch.

Although this screen is in text mode, a graphical version would work identically.

Home Control

Shows how a home can be controlled using a touchscreen.

The main menu displays the status of the Security, Lighting, Heating, and
Sprinkler systems, along with the current day and time. The current state of the
device is displayed in the "ON/OFF" field in real time. Touching this area
manually overrides the device.

Touching the name of a device displays a screen with two analog clocks - one for
the start time and one for the end time. Move the hands on the clock simply by

Содержание DOS and Windows Driver Disk







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды