Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Страница: 42 / 134

ELOCALIB 35
ELOCALIB
ELOCALIB.EXE measures the touch coordinates of known points near the
outside edges of the video image, and stores these calibration points for later use.
If you elect to store these points in AUTOEXEC.BAT when so prompted,
ELODEV uses them to automatically calibrate each time you reset the system.
To run ELOCALIB, type the following (typically from the \TOUCH directory):
ELOCALIB [Enter]
You will see a menu listing the video modes supported by your video card, such
as shown in Figure 4-1. SVGA modes will only be listed if you have a VESA-
compatible video card or video driver. Use the arrow keys to select the video
mode used by your application. For example, if your application runs in 80x25
text mode, calibrate in 80x25 mode even if your system is capable of VGA
graphics. Press [Enter].
The video will switch into the selected mode (unless it is not supported). Follow
the on-screen instructions to calibrate the screen. When you return to the menu,
the calibration points will be displayed. X or Y axis inversion is normal for most
touchscreens. Press [S] to save the calibration points.
ELOCALIB 1.6 - Copyright 1987-1994 Elo TouchSystems, Inc.
Mode Description Resolution Colors XLow XHi YLow YHi ZLow Zhi
01 CGA Text 40 x 25 16 Colors
03 CGA Text 80 x 25 16 Colors
04 CGA Graphics 320 x 200 4 Colors
06 EGA Graphics 640 x 200 2 Grays
0D EGA Graphics 320 x 200 16 Colors
0E EGA Graphics 640 x 200 16 Colors
10 EGA Graphics 640 x 350 16 Colors
11 VGA Graphics 640 x 480 2 Colors
12 VGA Graphics 640 x 480 16 Colors
13 VGA Graphics 320 x 200 256 Colors
0100 VESA Graphics 640 x 400 256 Colors
0101 VESA Graphics 640 x 480 256 Colors
0102 VESA Graphics 800 x 600 16 Colors
0103 VESA Graphics 800 x 600 256 Colors
0104 VESA Graphics 1024 x 768 16 Colors
0108 VESA Text 80 x 60 16 Colors
0109 VESA Text 132 x 25 16 Colors
010A VESA Text 132 x 43 16 Colors
Touchscreen orientation:
Use [-][¯] keys to select mode and [Enter] to calibrate.
[S] to Save points in file or AUTOEXEC and quit ELOCALIB. [Esc] to abort.
Figure 4-1. ELOCALIB Video Mode Menu