Elo TouchSystems DOS and Windows Driver Disk, Руководство пользователя

Страница: 58 / 134

52 Chapter 5 - MonitorMouse for DOS
MONMOUSE.COM may be interfering with its extraction. Generally you should
extract TSR's in the reverse order from which they were loaded.
Help Flag (-h)
At anytime, type:
MONMOUSE -h
to display quick reference information on all flags and the current version of
MonitorMouse for DOS.
Flag Defaults
The following summarizes the default values for each flag:
-m0 Mouse button emulation mode 0 - click
on touch.
-c+ Cursor on.
-b+ Beep on.
-d<current directory> ELOGRAPH.CAL in current directory.
-r8,16 Mickey/pixel ratios of 8 for horizontal
motion and 16 for vertical motion.
-j- Do not simulate mickey movement to
new touches.
-s+ Active in spawned programs.
-t- Not active after program terminations.
-i Use the first copy of ELODEV found
when scanning software interrupts 60
through 66 (hex) in that order.
Updating Flags
You may re-run MonitorMouse for DOS to update the flags of an installed copy.
If a flag is not specified, it is left unchanged. You may also reconfigure
MonitorMouse for DOS with a software command (see Appendix D).
NOTES
If you recalibrate, you will need to re-run MonitorMouse for DOS so it will
recognize the new values.
Only the -i flag cannot be updated. Extract MonitorMouse for DOS and reload it
with the new value.