58/76
MP120
NETWORK
RETURN
Mains supply (230 V~) return in the control unit and expansions. The
event is recorded in the event memory file after the mains supply has
been available for 30 minutes in a row, both in the control unit and
the expansions
AUX. “n” FAILURE
Auxiliary input “n” failure
EXP “n” Aux. Input
Expansion “n” auxiliary input failure
FAILURE
NO CONT. UNIT
INPUT SUPPLY
No power supply to control unit terminals “S”
NO OUTPUT
POWER
No power supply to control unit oSIR –SIR
NO SERIAL INPUT
POWER
No bus power supply
Poor exp. “n” power
supply
Poor expansion “n” power supply
Input “n” FAILURE
Expansion “n” input failure
TEL. LINE
TAMPERING
Telephone line failure
I/D _ _ _ _ _ _ _ _
Status change (actuation and deactivation); “ _ “ indicates a sector
OFF, whereas a digit indicates a sector ON. The sector status shown
is the final one.
u nn xxxx
Status change made through the keyboard by user “nn”, named
“xxxx”
Mechanic key
Status change made through the mechanic key
KEY:nn xxxx
Status change made through key “nn”, named “xxxx”
Daily Planner
Status change made by the time programmer
ON/OFF remotely
Status change made remotely, through the telephone or remote
control
IN : K : 05
Status change with specialized control unit input “KEY”
Set Time
Control unit time change
unn xxxx
User making the time change: “nn” is the number identifying the user,
“xxxx” is the respective uncoded description (Installer or Master)
Set Date
Control unit date change
unn xxxx
User making the date change: “nn” is the number identifying the
user, “xxxx” is the respective uncoded description (Installer or
Master)
SYS SelfTest
Cyclic call
Automatic system event, self-test cyclic call
SYS CallBack
Centre call
Automatic system event, remote surveillance centre call-back from
the control unit
SYS Start TLG
Remote control start Automatic system event, remote control starting
SYS End TLG
Remote control end Automatic system event, remote control ending (appears only if
carried out remotely)
Daily Planner ON
Time programmer actuation
Daily Planner OFF
Time programmer deactivation
unn Start TST
Input test start
Input test starting
unn End TST
Input test end
Input test ending
Refer to paragraph
2.7.2 Input encoding table
for the input identification codes.
