52/76
MP120
Press ▼ until the following message appears on the display:
(if “S” is in place of “N”, remote control deactivation will already be enabled). Confirm by pressing
ENTER
.
4. Use button ▼ to select «Remote Unset? S», then confirm by pressing
ENTER
. The buzzer will beep twice, and
the operation will be stored in the event memory file.
5. Press
EXIT
to leave the menu.
3.3.13 DISABLING SECTOR DEACTIVATION THROUGH REMOTE CONTROL
To prevent the sectors from being deactivated remotely, both by means of the FastLink software and the remote
control user (refer to paragraph
3.9 Remote control user)
, proceed as follows:
1. type in the Master code or the Installer code, then press
ENTER
twice.
2. The following message will appear on the display:
Press ▼ until the following message appears on the display:
Then confirm by pressing
ENTER
.
3. The following message will appear on the display:
Press ▼ until the following message appears on the display:
(if “N” is in place of “S”, remote control deactivation will already be enabled). Confirm by pressing
ENTER
.
4. Use button ▼ to select «Remote Unset? N», then confirm by pressing
ENTER
. The buzzer will beep twice, and
the operation will be stored in the event memory file.
5. Press
EXIT
to leave the menu.
Warning!
The sectors may still be actuated remotely, both through the FastLink software and the telephone,
even when deactivation is disabled.
3.3.14 KEY ENABLE
To enable a key (previously acquired and configured), proceed as follows:
1. type in the Master code or the Installer code, then press
ENTER
twice.
2. The following message will appear on the display:
Use button ▼ to select the following menu:
Then press
ENTER
to confirm.
3. The following message will appear on the display:
R e a d N e w K e y
K e y P r o g r a m m i n g
E v e n t M e m o r y
R e m o t e U n s e t ? S
R e m o t e C o n t . S
P r g . R e m o t e c o n t r o l
E v e n t M e m o r y
R e m o t e U n s e t ? N
R e m o t e C o n t . S
