34/76
MP120
Then confirm by pressing
ENTER
.
4. The following message will appear on the display:
Press ▼: the following message will appear on the display:
Press
ENTER
to confirm. If the «SpeechBoardMiss!» message appears, the SV108 voice synthesis module is
not available in the control unit.
5. The following message will appear on the display:
Press
ENTER
: the cursor will start blinking to indicate the start of recording. Now, you will be allowed to record the
base message within 20 seconds; you may interrupt the recording at any time by pressing button ENTER.
6. After the aforesaid 20 seconds’ time has elapsed, the following message will appear on the display:
Press
ENTER
: the cursor will start blinking, and you will be allowed to record the message for the “Break-in”
alarm within 4 seconds. Upon completion, the indication for the subsequent message to be recorded will appear
on the display.
7. Record all the telephone messages like you have done with the “Break-in” message. When all the messages
have been recorded, the following message will appear on the display:
8. Press
ESC
several times to exit the menu.
Warning! To modify the content of a message, all the messages need be recorded again.
2.14.10 VOCAL MESSAGE PLAYING
The procedure below allows you to listen to the recorded vocal messages again:
1. Type in the Installer code (factory setting: 000000), then press
ENTER
twice.
2. The following message will appear on the display:
Press ► until the message below appears:
Then press
ENTER
to confirm.
3. The following message will appear on the display:
Press ▼ until the message below appears:
Then confirm by pressing
ENTER
.
V o c a l s e t t i n g s
P h o n e n u m b e r P R G
C o m m u n i c a t o r P R G
E v e n t M e m o r y
R e c o r d M e s s a g e
M e s s a g . : B u r g l a r y
M e s s a g . : B A S E
R e c o r d M e s s a g e
P l a y M e s s a g e
