28
MEDEA Programming Manual
Feature
Mode 1
Mode 2
How it calls
For each telephone number and
sending mode, the dialler makes
a number of call attempts equal
to those set for each contact in
the Contact section, consecutive
if there is only one number
configured, alternating them with
calls to the other number in the
pair if more than one number
has been configured. The time
interval between calls is the
technical time to enter the new
number.
For each telephone number, the
transmitter makes a number of
call attempts equal to those set
for each contact in the Contact
section, following the sequence
of calls. The time interval
between calls is the technical
time to enter the new number.
How to stop the call cycle
A telephone call cycle cannot be
stopped once it has started and
the system will continue to call
the given number until the end of
the attempts. Otherwise, dial
"12" on the phone during the
message. According to the value
of the
Stop Cycle of calls by
Code
parameter, all calls will be
blocked for that number or for all
remaining numbers.
What happens if another event
occurs during the call cycle
The priority of the event is
checked and if higher priority the
call cycle for the event is started.
If a new event for a given
number occurs during a call to
that number, it is queued
immediately.
Table 8 - Telephone alarm sending mode
