Elkron MEDEA, Руководство по программированию

Страница: 85 / 136

MEDEA Programming Manual 83
5.15
Expansion modules
It can be used to view the wired and wireless expansion modules of the system.
It is accessed through the
PROGRAMMING
→ Bus Peripheral → Expansions
menu.
Figure 80 - Expansions
The following information is provided for each expansion module:
•
NUMBER : This is the sequential number of acquisition of the expansion module.
•
PHIS.ADDRESS : This is the physical address of the expansion module.
•
DESCRIPTION
: This is the alphanumeric label used to identify the expansion module, e.g. “Garage”,
more easily. The description can be up to 32 characters long, chosen from alphabetical characters,
including accented characters, numbers and space; no other characters, such as special characters
or symbols, can be used.
Double-click on the expansion line to open a pop-up window where you can type the alphanumeric label
(
Description ) that is used to more easily identify the expansion module. The label can be up to 32
characters long.
The following buttons appear under the table:
•
Modify : This can be used to modify the description of the expansion highlighted in the table.
•
CSV : This can be used to export the expansion module table to a
“.csv” file, which can be opened
with a spreadsheet.
•
PDF : This can be used to export the expansion table to a PDF file.
•
Locate : This activates the procedure for locating the device.
•
End Locate : This ends the localisation procedure.
5.16
Keypads
This can be used to view and configure the keypads in the system.
It is accessed through the
PROGRAMMING
→ Bus Peripheral → Keypads
menu.
Figure 81
– Keypads