72
MEDEA Programming Manual
Double-click on the phone number line to open a pop-up window. The number and type of parameters in
the window changes according to the selected
Format
.
Figure 64 - Telephone number customisation
In the pop-up window you can:
•
Enable and disable the phone number (
Enabled
).
•
Enter the identification label of the telephone number in
Description
•
Associate sectors with the telephone number (
Associated Sectors
), by selecting them one by one or
selecting them all by clicking the
All
button. The
None
button deletes all associations. To delete a
single association, click on the sector number.
•
Enter the phone number (
Phone
). Valid characters: numbers and +. Do not insert spaces.
•
Choose the message (
Base Message
) used at the beginning of each text or voice message you send.
•
Define the number of call attempts (
Retries
) to be made on the number.
If
Contact-ID
was chosen as
Format
, then instead of the
Contact-ID
parameter the Base
Message
parameter will be shown, where to insert the identification code of the control panel.
IMPORTANT!
Events can only be sent using the
Contact-ID
protocol if the
ILT700
PSTN module is
present and correctly connected to the telephone network.
