MEDEA Programming Manual
75
In the pop-up window you can:
•
Enable and disable the phone number (
Enable
).
•
Enter the identification label of the telephone number in
Description
.
•
Associate sectors with the telephone number (
associated Sectors
), by selecting them one by one or
selecting them all by clicking the
All
button. The
None
button deletes all associations. To delete a
single association, click on the sector number.
•
Enter the phone number (
Phone
). Valid characters: numbers and +. Do not insert spaces.
•
Enter the code assigned by the receiver
•
Define the number of call attempts (
Retries
) to be made on the number.
•
Warning: The Contact-ID communication protocol can only be used if the
ILT700
PSTN interface is
present in the control unit and correctly connected.
5.11.4
Base Messages
Common messages are sent at the beginning of voice and text communications when paired with a phone
number.
Figure 68 - Common messages for voice and text communications
Double-click on a common message to open a pop-up window in which you can enter the
Description
, i.e.
the text that will be sent as a text or voice message. The description can be up to 80 characters long,
chosen from alphabetical characters, including accented characters, numbers and space; no other
characters, such as special characters or symbols, can be used.
Click on the
Save
button to save the changes, the
Close
button to close the window and not save the
changes.
The following buttons appear under the table:
•
Modify
: This can be used to edit common message highlighted in the table.
•
CSV
: This can be used to export the common message table to a
“.csv” file, which can be opened
with a spreadsheet.
•
: This can be used to export the common messages table to a PDF file.
The
<
and
>
buttons in the bottom right are used to navigate between common message pages.
