68
MEDEA Programming Manual
Double-click on the user code line to open a pop-up window.
Figure 60 - User code customisation
In the pop-up window you can:
•
Enter the identification label of the user code in
Description
. The text entered is also used to generate
the voice messages. Use only alphabetic characters, including accented characters, numbers, and
spaces. Maximum length of 32 characters.
•
Associate sectors with the code (
Associated Sectors
), selecting them one by one by clicking on them
or selecting them all by clicking on the
All
button. The
None
button deletes all associations. To delete
a single association, click on the sector number.
•
Associate the code with an output that is activated when the user code is entered (
access Control
Output
).
•
Determine the actions that the code can perform on the intrusion detection system (
System Output
).
•
Enable and disable the
Remote Control
by user code.
•
Associate the code with a
Group
, which can be enabled or disabled according to time and day slots.
•
Restore the default numeric value of the code if you have forgotten the custom numeric value. To do
this, just click the
Set factory Code
button and confirm the action (for default code values see
paragraph. 2.1.1
).
Click on the
Save
button to save the changes, the
Close
button to close the window and not save the
changes.
IMPORTANT!
Users created in this way must be enabled by the Master with the keypad to be
operational.
The following buttons (some are enabled only by highlighting a sector of the table) are shown below:
•
Modify
: This can be used to edit the data associated with the user code highlighted in the table.
•
CSV
: This can be used to export the user code table to a
“.csv” file, which can be opened with a
spreadsheet.
•
: This can be used to export the user codes to a PDF file.
NOTE
: The user code modified by the user is not displayed by the program or exported together with the
other data. The user code can only be changed from the keypad.
The
<
and
>
buttons at the bottom right are used to navigate between the pages of the user codes, if their
number is greater than the number that can be displayed in a single screen.