MEDEA Programming Manual
103
6.1.2
Bus Peripherals
This can be used to view the status of the supplementary power supply units connected on the bus, to
view the peripheral devices present on the bus and to check the quality of the dialogue with the control
panel.
6.1.3
Supplementary Power Supplies
This can be used to displays all information and values about the additional power supply units connected
to the bus line.
It is accessed through the
DIAGNOSTIC
→ Bus Peripherals
menu.
Figure 112 - Power supply units
The Supplementary Power Supplies table shows the following values:
•
LOGIC ID:
Logical address assigned to the power supply unit.
•
DESCRIPTION
: This is the alphanumeric label used to identify power supply unit more easily.
•
POWER SUPPLY VOLTAGE:
Voltage measured at power supply unit output
(ter/-PS).
•
BATTERY VOLTAGE:
Voltage measured at the battery terminals.
•
BATTERY CHARGE CURRENT:
Current drawn by the battery for charging it.
•
BUS CURRENT:
Current supplied on BUS terminals.
•
STATUS:
This shows the status of the device.
6.1.4
Bus Peripherals
This can be used to display of all information and values concerning the peripheral devices connected on
the bus line.
It is accessed through the
DIAGNOSTIC
→ Bus Peripherals
menu.
Figure 113 - Bus devices
