ELCOM Euro-200TE, Руководство пользователя

Страница: 32 / 114

32
Programming manual
Flag 4 - Required operations
Figure 3.4 Fourth system flag values
Digit Default setting Meaning Valid values
1 1 Subtotal amount print out after Subtotal key is pressed 0 – no, 1 – yes
2 0 Required Subtotal key pressed before receipt is finished
0 – not required,
1 – required
3 0 Required Credit Card number entering if paid by Credit
0 – not required,
1 – required
4 0 Required customer’s payment amount entering
0 – not required,
1 – required
Flag 5 a) - Communication with PC and payment terminal
Figure 3.5 a) Fifth a) system flag values
Digit Default setting Meaning Valid values
1 5 PC port number
0 – device is not used
1..4 – RS-232 port number (COM1-COM4)
5 - USB port
6 – RS-485 interface on COM2
2 1
Programming of communication speed for the PC.
Parity: none, DataBits: 8, StopBits: 1 0 – 9 600 Bd
1 – 38 400 Bd
3 0 Data transmission direction in PC-ON LINE mode
0 – PC transmits
1 – PC transmits and receives
4 0 Payment terminal port number
0 – device is not used
1..4 – RS-232 port number (COM1-COM4)
5 0 Communication protocol for payment terminal 0 - device is not used
6 0
External Journal Reader connectivity (Port replica-
tion) 0 - device is not used
1 - device is connected
With USB communication, a USB driver has to be installed on the PC from the support CD; it is also available at www.
elcom.eu.
Two and more devices can´t be assigned in figure 5a) and figure 5b) to the same serial port. Port no. 5 (USB) and 6 (RS-
485) shares pins with COM2 port. Only one device can be connected to the same port.
At using JODO (external journal reader), PC communication port has to be set to COM port 1.
Flag 5 b) - Scanner and scales configuration
Figure 3.5 b) Fifth b) system flag values
Digit Default setting Meaning Valid values
1 0 Scanner port number
0 – device is not used
1..4 – RS-232 port number (COM1-COM4)
2 3 Bar code scanner communication speed
0 – 1 200 Bd
1 – 2 400 Bd
2 - 4 800 Bd
3 - 9 600Bd
4 - 19 200Bd