ELCOM Euro-200TE, Руководство пользователя

Страница: 44 / 114

44
Programming manual
6) Press

( S
UBTOTAL
) key to continue with programming the name for the current department. The
cash register display shows current department number along with the label (“
name
”) in the se-
cond display row; first display row contains current department name on the right.
VGR01
1 VGR NAMN
7) Enter the department name. If you mistype, you can correct your mistakes by pressing

( C
LEAR
).
See the end of chapter for more detailed instructions on entering texts.
8) Press the

( S
UBTOTAL
) to continue department programming for next department; proceed to step
3). The programming of departments can be finished at any time by pressing

( T
OTAL
) key.
Departments correcting
1) Switch the cash register to the “P” mode by pressing

.
2) Enter the number of the department you want to adjust (1–30) and press
h
(DPT) key, or press
the selected department button to directly choose required department.
3) Continue re-programming desired values as shown in the section above.
4) You can print out all the programmed department values by pressing

( C
HECK
) key; to print out
the currently programmed department, press

( EAN ) key.
5) Finish the corrections by pressing

( T
OTAL
) key.
Department values print out
Check the programmed department values by pressing the

( C
HECK
) key in the department program-
ming mode. In the programming mode, press the direct button of a department. Afterwards press the

( C
HECK
) button. To print the settings of currently programmed department, press the

(EAN) key.
SALE UNITS PROGRAMMING
Sale unit can be assigned to each PLU and represents the unit in which the PLU is sold. It is possible to
program eight sales units with up to three characters each. Figure 3.23 shows the default settings for sale
units; you can adjust these defaults to your needs.
Sale units programming procedure:
1) Switch the cash register to the “P” mode by pressing

.
2) Press the

( S
URCHARGE
) key. The ECR display shows the current sale unit number along with
the label (“
sale unit
”) in the second display row and programmed unit in the first row.
3) Enter the text for the current sale unit (up to three characters). You can correct mistypes by pressing

( C
LEAR
) key. See the section on entering texts at the end of this chapter.
st
2 F
ö
rs.enhet