ELCOM Euro-200TE, Руководство пользователя

Страница: 52 / 114

52
Programming manual
After successfully starting the second Euro phase – dual currency circulation – the electronic cash register
will print an informational message summarizing the changes.
Step Press
1.
 
2.
 
resp. (
  
)
Euro steg
2
INHEMSK VALUTA
EUR
UTL. VALUTA
SEK
Valutakurs
1 EUR = 10.4700 SEK
Valuta flag
321
------------------------------
------------------------------
Växlingskurs
1EUR=10.4735 SEK
Dubbel visning
av
After starting the second Euro phase, the main currency will be the EUR and the foreign currency will be
the SEK.
Caution:
• If the 6th parameter of the first system flag (base prices for a PLU in the electronic cash register database
- unit price), is not set properly, it can be changed from 2 to 3 or from 3 to 2 prior to the first purchase. The
currency parameter (system flag) will be set automatically and can be changed only if the GT=0 (changing
the flag is not advisable). To achieve this, a master reset must be performed by a service technician, after
which the first and second Euro phase has to be started. If the GT is equal to zero, the first system flag
can be changed.
• During the second Euro phase, the exchange rate cannot be changed. The exchange rate will be the
conversion rate used in first phase for informational price displaying.
• During the second Euro phase, a foreign currency cannot be used because the second currency is the
Swedish crown and only these two currencies – the Euro and the Swedish crown can be used.
Notice:
To use a different foreign currency, change to the third Euro phase is required. A description of how to
do this is described in the next chapter.
Third Euro phase
In this phase, a foreign currency (different than the SEK) can be set and used. Cancellation of dual display
is not required in order to use a foreign currency. The main currency is the Euro, the dual-informational
currency is the Swedish crown and the foreign currency is any other currency.
Procedure for setting the foreign currency:
1) Execute a daily and monthly Z report.
2) Switch into programming mode by pressing the key combination

.
3) Enter the code

.