ELCOM Euro-200TE, Руководство пользователя

Страница: 46 / 114

46
Programming manual
3) Enter the first price for the PLU up to a maximum of eight digits, including the decimal numbers. An in-
correct value can be deleted with the key

.
4) The set value is saved by pressing the

key, and programming continues with the next tax value.
The message ”PLU MOMS 1“ will appear on the display, with the actual tax level in the second row.
Enter a value

–

, matching the tax level order number and save this value by pressing the

key. Upon entering a value the name – value of the tax will be displayed. If the

key is pressed, the
programming of the tax level for the first price will be cancelled and the tax level set will be ignored. An
incorrect value can be deleted with the key

.
25.00%
1 PLU MOMS 1
5) After saving the value from the previous step, enter the second price for the PLU, up to a maximum eight di-
gits including the decimal numbers. The PLU order number will appear in the first row and in the second row
the description ”PLU PRIS 2“, with the actual value of the second price. Save this value by pressing the key

and continue programming the next parameter. An incorrect value can be deleted using the

key.
0.00
1 PLU PRIS 2
6) The next step is the programming of the second tax level. Enter a value

–

, matching the second
tax level order number and save this value by pressing the

key. Upon entering value, the name – va-
lue of the tax to be used is displayed. Pressing the

key cancels the programming of the tax level for
the first price and the tax level set will be ignored. An incorrect value can be deleted using the

key.
25.00%
1 PLU MOMS 2
7) After setting and saving the second tax level, programming continues with the setting of the first PLU
flag. The actual PLU flag will appear in the first row and the PLU order number will appear in the se-
cond row with the description “PLU FLAG1“. Enter the value of the flag per figure number. 3.22. A PLU
ranging from 1001–1015 should not be set to a department with a negative price. If the flag for a PLU is
set to “descriptive”, only the name of the PLU is printed without a price or an amount. After setting the
first PLU flag, set the value by pressing the

key; cancel and leave the programming of this section
using the

key or delete an incorrect value with the

key.
01000
1 PLU FLAG 1
Figure 3.24 Values for the first PLU flag
Number Default value Meaning Valid values
1 - 2 01
Assigning of a PLU to a department gro-
up
1 - 30
3 0 Descriptive PLU 0 – no, 1 – yes
4 0 Type of PLU
0 – normal PLU,
1 – single item PLU
5 0 Sale feature
0 – sale forbidden,
1 – open price (manually entered price),
2 – fixed price (pre-programmed price),
3 – 1+2 (pre-programmed price or the possibility
to enter a price manually)