ELCOM Euro-200TE, Руководство пользователя

Страница: 38 / 114

38
Programming manual
Printing of the extended flag values
In the programming mode, select extended flags programming by pressing the

( DISCOUNT ) but-
ton. After pressing the

( CHECK ) button flags values will be printed. It is possible to print the value of the
particular flag only by pressing the

( EAN ) button.
TAX RATES PROGRAMMING
The cash register allows the use of four tax rates. Both the tax rate and its name are programmable. Tax can
be programmed only after daily, monthly report.
Tax level programming procedure:
1) Switch the cash register into the programming mode “P” by pressing

.
2) Press the

(Refund) key. The display shows the number of programmed tax level and its rate.
25.00%
1
MOMS SATS
3) Enter the tax rate without decimal point. First two numerals compose integer part of the rate, last
two compose decimal part (i. e. for tax rate of 19% it is 1 9 0 0). The tax rate can be changed only
after daily and periodical report have been executed in “Z” report mode. If you need to disable
a specific tax level, programme its tax rate as 100.00% or higher.
4) Press the

(Subtotal) key. Display will show label for programming the tax level name.
5) Enter name of TAX level, which will be printed on receipts and reports. Save entered value and move
to next VAT setting by pressing

(Subtotal) key.
6) To exit the tax level programming, press

(Total) key.
More details on entering texts are located at the end of this chapter.
Correction of the tax level values
1) Switch the cash register into the “P” mode by pressing  .
2) Enter the number of the tax level you want to edit and press the

( R
EFUND
) button.
3) Re-program the parameters as described in section above.
4) You can print the newly programmed tax level values by pressing

( C
HECK
) key.
5) Finish the corrections by pressing the

( T
OTAL
) key.
Printing of the programmed tax values
To verify the programmed values, print them by pressing the

( C
HECK
) button in the tax programming
mode. If working in another programming mode, press the

( R
EUND
) key and then the

( C
HECK
)
key. It is possible to print the rate and name of a particular tax level by pressing the

( E
AN
) button.
Programming of organization ID
The Organization ID is printed as 9th row in the top text logo. To set it, enter P mode
 
and enter code
    
. After that the ECR will request to enter the organization ID with help of the numeric
keypad. The organization ID number has the following form: XXXXXX-XXXX.