ELCOM Euro-200TE, Руководство пользователя

Страница: 50 / 114

50
Programming manual
PLUs that have been programmed will be printed. It is possible to print the programmed value of a particular
PLU by pressing

( EAN ) key.
PROGRAMMING OF THE EURO CURRENCY
We advise you to read the sections “Basic terms regarding the Euro phase“ and “payment in a foreign cur-
rency“. The cash register Euro-200TE electronic cash register can perform accounting in a foreign currency
and can also work with the special Euro phases during the change of the primary currency, including both the
periods of dual display and dual currency circulation.
Getting information about the actual Euro phase
Information regarding the actual Euro phase and the conversion setting can be read anytime from the
electronic cash register by following this procedure:
1) Switch to programming mode by pressing key combination

.
2) Enter

Information regarding the actual Euro phase and currency settings will be printed on a receipt.
Important notice:
Returning from any Euro phase to a previous phase is not possible without the master reset of the
elec-
tronic cash register , which is performed by a service technician.
Default phase - using the main currency and a foreign currency
A new electronic cash register or an electronic cash register which has passed through master reset (per-
formed by a service technician) is in this default phase. The electronic cash register can work with local
currency (SEK) and any other foreign currency (EUR or USD).
In this phase, the value and parameters for the foreign currency can be changed by following this procedure:
1) Switch into programming mode by pressing the key combination

.
2) Press the key

3) Enter the 3-character currency code (–for example: EUR) and press the

key to save this value. Then
move to the next setting.
4) Enter the currency exchange rate such as: “1USD = xx.xxxx SEK“. Press the

key to continue to the
next step.
5) Enter the currency parameters regarding figure 3.22 and set the value using the key

.
Notice:
Parameters for foreign currency can be changed only after a Z-monthly report and an exchange rate can
be changed only after a Z-daily report
Figure 3.26 – Foreign currency parameters
Digit Default setting Meaning Valid values
1 0 Rounding method
0 – up from 5,
1 – always up,
2 – always down,
3 – special quarter rounding
2 2 Number. of decimal places for currency displaying 0 - 3
3 2 Number. of decimal places for currency rounding 0 - 2