ELCOM Euro-200TE, Руководство пользователя

Страница: 28 / 114

28
Programming manual
INITIALIZATION
If the electronic cash register is being used for the first time, it’s suggested to first initialize the electronic
cash register. At initialization, all information will be erased from the electronic cash register and the electro-
nic cash register will have factory default settings and data. Only the cumulative sum – GT, the order number
of the daily and monthly reports and the value of the first system flag – will be unaffected. Initialization can be
done only after a daily or monthly (periodic) report in Z mode and the saving of the electronic journal.
Initialization procedure:
1) 1) Start the cash register. By pressing

, then switch to P mode.
15-05-2009
P
19:05:33
2) Press key

. The words „
Memory clearing
“ will appear on the display and in the bot-
tom row will be the options for continuing with data erasing ( Y-ST ) or cancellation of initialization
( N-CL ).
Rensar minnet
J-ST/N-CL
3) To confirm initialization, press

( SUBTOTAL ). To cancel, press

.
4) After confirmation, on display will be the actual set PLU range and the interval in which the user can
choose the PLU limit number. By entering numbers from

to

the user can set the number
of PLU depending on the hardware memory extension:
PLU antal: 16000
Intrvl 1100-16000
5) To confirm the setting for the number of PLUs, press

(SUBTOTAL), or cancel the initialization
with key

( TOTAL ).
6) After entering the number of PLUs, rounded up to the hundred, the memory available for the journal
will be displayed.
PLU:16000 JRN:512kB
J-ST/N-CL
7) If the settings are correct, confirm initialization with the set number of PLUs and the memory left for
the journal by pressing the key

(SUBTOTAL) to continue or the key

to go back to the number
of PLUs setting.
8) After confirmation of initialization, the message “Memory clearing“ will appear on the display, and
the same message will be printed on a receipt, after which the cash register will start initialization.
9) Enter the date in the format (DDMMRR) and the time as (HHMM).
010106
ANGE DATUM
0000
ANGE TID
10) After entering of the date and time, the cash register will print a message summarizing memory alloca-
tion Memory clearing.