Effekta AX M2 Series, Руководство пользователя

Страница: 57 / 132

Innovating power.
Storage, Transport and Unpacking – Page 57
Solar inverter | V1.7
7.3 Unpacking and positioning
At the installation site, the packaging must be removed with the greatest care to avoid
damages to the unit and the packaging material as much as possible.
The following order is to be observed here:
▪
Mind that, during the unpacking, there is sufficient room for activity.
▪
Open the metal tabs on the packaging walls and cover and carefully remove
these.
▪
Also remove all padding and the accessories so that the unit stands alone on the
palette.
▪
Lift the unit off the palette by means of a forklift or lift truck. It is important to
observe here that the pick-up points are carefully chosen and are eventually subject
to floor areas in order to not damage, for example, the side walls or other parts of the
unit;
▪
Inspect the scope of the delivery for completeness.
▪
Inspect all packaging materials to ensure that no parts are missing.
▪
After unpacking, check the delivery for visible damages that could have occurred
during transport. Under no circumstances should you activate the device if you have
identified damages or if parts are missing. Instead, inform the supplier or distributor
immediately .
▪
The packaging is recyclable. Please save it after unpacking for reuse or dispose of it
properly.