EDNord QMS 1060E, Начало работы

Страница: 35 / 120

Installing
Consumables
2-9 Setting Up Your Printer
Installing Consumables
You must install the toner cartridge, load and install the cassette, con-
nect the power cord, and print the start-up page before you can install
any options.
Installing the Toner Cartridge
In your laser printer, characters and images are created through a
process that applies toner (made of carbon particles) to the page in
the printer’s fusing unit. When an image is formed, heat and pressure
are applied to transfer the image to the page. The toner cartridge con-
tains the toner and photosensitive drum needed to operate the laser
printer. You may purchase additional toner cartridges from your QMS
vendor.
» Note: The toner cartridge is sensitive to bright light. Do not remove
the cartridge from its protective bag until you are ready to install it.
Store the cartridge in an environment that is not subject to extreme
heat or humidity. Keep the toner cartridge away from your computer.
The magnets in the cartridge can damage data, particularly on your
floppy disks.
1 Lift the toner cartridge out of its shipping carton, open the
aluminum protective bag, and remove the cartridge.
» Note: After taking the toner cartridge from its protective bag, do
not open the cover or touch the PC drum of the toner cartridge
because it may deteriorate the drum and reduce print quality.
2 Remove the tape seal.
Holding the cartridge in place with your right hand, use your left
hand to grasp the green tab on the left side of the toner cartridge.
Pull the tab straight out (it is about 22''/559 mm long). If the tab
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500