EDNord QMS 1060E, Начало работы

Страница: 70 / 120

Installing the
Software
QMS 1060E Print System Getting Started 4-8
3 Refer to the DOS or Windows information elsewhere in this
section, “Software Installation,” for further instructions.
» Note: You can’t install the utilities by copying files from the disks.
You must run the installation program.
4 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
5 Skip to “Configuring the Interface,” later in this chapter.
UNIX
» Note: The procedure described here is for UNIX Host Software
installation from disk. If you have a cartridge or tape, refer to the
installation documentation accompanying the cartridge or tape.
1 Log on the UNIX system as root.
2 Change to the directory in which you want the UNIX utilities
installed.
The utilities automatically create and are installed in a directory
named QMSoft in the current directory.
» Note: This directory must be able to be mounted by all network
nodes that need to access the printer.
3 If a PC file system (PCFS) is available on the UNIX host,
mount the disk.
For information on mounting a DOS FAT-formatted disk refer to
the UNIX man page.
4 Transfer the HS_TAR image file to the UNIX host directory
where the file is to be expanded.
» Note: If the UNIX host doesn’t support PCFS, transfer the image
from a PCFS-capable device (such as a DOS system) to the
UNIX system via binary FTP.
5 In the directory in which the image file is located, expand the
tar image file by typing
tar xvf hs_tar
↵
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500