EDNord QMS 1060E, Начало работы

Страница: 53 / 120

Testing
Communication
3-7 Connecting to a PC
2 If you’re prompted for the name of the list device, type
lpt1
↵
or type the name of the PC’s parallel port to which the printer is
connected (for example,
lpt2
or
lpt3
).
» Note: If the computer has more than one parallel port, they're
probably labeled. If not, check the computer documentation for
the LPT port names.
3 If the printer and PC are communicating, a blank page ejects
from the printer. Skip ahead to “PC Printing Software” to fin-
ish connecting the printer.
If a blank page doesn’t eject and you typed the file correctly, you
may want to check your AUTOEXEC.BAT file to see if LPT1 (the
parallel port) is being directed to COM1 (the serial port):
a If the AUTOEXEC.BAT file contains the line
MODE LPT1:=COM1:
delete it.
b Then type
MODE LPT1:,,P
↵
The “P” represents infinite retry and it tells the PC to send
print jobs until the printer accepts them.
c Restart the PC and retry the communication test.
See chapter 6, “Troubleshooting,” of Operation and refer to
your DOS documentation for more information.
Serial Communication
1 To send the PRINTEST.PS file you just created to the printer,
type
print printest.ps
↵
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500