EDNord QMS 1060E, Начало работы

Страница: 73 / 120

Configuring the
Interface
4-11 Connecting to an Ethernet Network
n
Remote Console—For information on accessing Remote Con-
sole, refer to the appropriate chapter in the system administra-
tor’s guide. For information on using Remote Console, refer to the
QMS Crown Remote Console User’s Guide .
EtherTalk
1 If your network has more than one zone, use the Administra-
tion/Communications/Network2/CrownNet/EtherTalk/Zone
Name/Zone Part 1 and Zone Part 2 menus to enter the name
of the zone to which the printer is attached.
» Note: The two Zone Part x menus allow you to identify 1 zone
with a name up to 32 characters long. (Up to 16 characters can
be entered in each of the two menus). You cannot use these two
menus to identify two zones.
Trailing spaces are not considered part of the zone name.
All standard printable ASCII characters are valid except the @
and ' symbols.
2 Skip to “Configuring the Network,” later in this chapter.
LAN Manager/LAN Server
1 One unique printer name is broadcast to the network. Use
the Administration/Communications/Network 2/CrownNet/
Lan Manager/Printer Name menu to enter the name of the
printer.
» Note:
The name can be up to 16 characters long. Spaces and
lowercase characters are not allowed. However, underscore
characters (_) are allowed to simulate multiword names (for
example, PRODUCT_MKTG).
2 Skip to “Configuring the Network,” later in this chapter.
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500