EDNord QMS 1060E, Начало работы

Страница: 79 / 120

Configuring the
Network
4-17 Connecting to an Ethernet Network
5 Select a pipe name from the Output Port list.
Pipe names have the form \PIPE\QMS_ name where name is the
printer’s default hardware address or the printer name set in the
“Configuring the Interface” section, earlier in this chapter.
If a QMS pipe is not available, make sure you have installed the
CrownNet Manager for OS/2.
6 Choose Create to confirm the new printer definition.
7 Continue with the following section, “Print Queue Sharing.”
Print Queue Sharing
To access a print queue from other workstations or servers on the
network, the queue must be a shared resource. The following proce-
dure is only one of the ways a queue can be shared. For other meth-
ods, see your LAN Manager/LAN Server documentation.
» Note: You need administrator privileges to perform this operation.
1 If necessary, with OS/2 running, open an OS/2 window.
2 Type
net share queue_name /print
↵
where queue_name is the queue or printer object you created
above.
» Note: While queue and printer names may differ in OS/2 version 1.x,
they are the same in version 2.x.
NetWare
Add a Print Server
1 From any network workstation, log in as supervisor to the
file server you want to service the printer.
2 Start the NetWare PCONSOLE utility.
3 At the Available Options menu, select Print Server Informa-
tion and press Enter.
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500