EDNord QMS 1060E, Начало работы

Страница: 52 / 120

Testing
Communication
QMS 1060E Print System Getting Started 3-6
2 Turn on both the printer and the PC.
3 Test communication between the printer and the PC.
You can do this by sending a file from one of your applications, or
you can see the following section, “Testing Communication.”
Testing Communication
To test communication between your printer and your PC, first create
a short file that ejects a page from the printer. Then send the file to
the printer.
Creating the Test File
To create the test file, type the following commands at the DOS
prompt:
copy con printest.ps
↵
showpage
↵
^D^Z
↵
(All commands above except the DOS copy command are case sen-
sitive and must be typed exactly as shown.) Showpage is a Post-
Script command that prints a blank page. The
↵
symbol means to
press the Enter key. To produce the ^D and ^Z, press and hold down
the Ctrl key while you type the appropriate letters (d and z). These
characters signify the end of the file and must always be included.
Sending the Test File
Parallel Communication
1 To send the PRINTEST.PS file you just created to the printer,
type
print printest.ps
↵
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500