EDNord QMS 1060E, Начало работы

Страница: 21 / 120

Printer
Features
1-13 Introduction
User Benefit—This allows and increases the speed of such printer
features as collation and automatic jam recovery, if enabled.
Automatic Jam Recovery
Crown technology also provides automatic jam recovery, if enabled.
With most printers, if a media jam occurs, you must remove the
jammed media and then reprint the job. If a media jam occurs on a
Crown printer, however, the printer reprints the jammed page as soon
as you remove the jammed media and then continues with the print
job. This is possible because compressed data formats allow more
pages to be stored in memory. The printer remembers the last page
printed, pulls the necessary information from memory, and automati-
cally reprints any lost pages.
User Benefit—You save time and print media because it’s unneces-
sary to resend a print job after clearing a media jam.
Energy Star Compliance
User Benefit—The EPA Energy Star Computers program promotes
the use of energy-efficient personal computers, monitors, and printers
and the reduction of air pollution caused by power generation.
Software Loadable System (SLS)
Your printer has a software loadable system, which allows you to
replace or upgrade its system software from a Macintosh, a PC, or
over any network interface.
The QMS 1060E Print System is compli-
ant with US Environmental Protection
Agency (EPA) Energy Star regulations.
After a specified length of inactivity, the
printer changes to a low-power state (the
engine remains on, but the fuser turns
off). When a print job is received the
printer returns to normal power within 90
seconds.
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500