EDNord QMS 1060E, Начало работы

Страница: 74 / 120

Configuring the
Interface
QMS 1060E Print System Getting Started 4-12
NetWare
If you want to change the default settings, use the following proce-
dure to name the file and print servers. These names must be unique.
» Note: In CrownAdmin, the printer shows up as
QMS- xxxx -Print -
System-hardwareaddress
, where
xxxx
is the printer model
number and
hardwareaddress
is the printer’s hardware address as
found on the printer start-up page.
1 In the Administration/Communications/Network 2/CrownNet/
NetWare/Config PServer/File Srv Name[1], File Srv Name[2],
and File Srv Name[3] menus, enter the name of the target file
server.
» Note: The three File Srv Name[x] menus allow you to identify 1
file server with a name up to 48 characters long. (Up to 16
characters can be entered in each of the three menus). You
cannot use these three menus to identify three file servers.
Spaces and lowercase characters are not allowed within file
server names. However, underscore characters (_) are allowed
to simulate multiword names (for example, PUBS_SERVER). At
the printer control panel only, a space must be used following the
last character of the file server name to end the name.
2 In the Administration/Communications/Network 2/CrownNet/
NetWare/Config PServer/PServer Name[1], PServer Name[2],
and PServer Name[3] menus, enter the name of the config-
ured print server.
» Note: The three PServer Name[x] menus allow you to identify
one print server with a name up to 48 characters long. (Up to 16
characters can be entered in each of the three menus). You
cannot use these three menus to identify three print servers.
Spaces and lowercase characters are not allowed in print server
names. However, underscore characters (_) are allowed to simu-
late multiword names (for example, PUBS_PSERVER). At the
printer control panel only, a space must be used following the last
character of the print server name to end the name.
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500