Eco ETS Series, Руководство пользователя

Страница: 33 / 36

System
No. Description Cause Solution Testing time Reaction
E50 01…99 System error Unexpected hard- or soft-
ware event
 Switch on/ off drive

Perform factory reset

Perform software update
 Contact manufacturer
Permanetly W or F or H
E51 01…99 System error Unexpected hard- or soft-
ware event
 Switch on/ off drive

Perform factory reset

Perform software update
 Contact manufacturer
Permanetly W or F or H
E52 01…99 System error Unexpected hard- or soft-
ware event
 Switch on/ off drive

Perform factory reset

Perform software update
 Contact manufacturer
Permanetly W or F or H
Options
No. Description Cause Solution Testing time Reaction
E60 00 Relaisprint 0 Option print has been removed,
redirected or is defective
 Check if option exists

Falls If defective:
Replace or remove from configuration
 Note:

Deleting the error 60
 see mounting instruction ECO ETS
(Chapter 13.7.1)
Permanently W
10 Relaisprint 1 W
20 Radio print W
30 Fire protection
print
A
Closing sequence control / Sluice
No. Description Cause Solution Testing time Reaction
E70 xx CAN-Bus-
configuration
CAN-Address xx existing
two times.
Define closing sequence or sluice roll
correctly.
Permanently W
E71 01 CAN-Connection No CAN-Connection  Plug in, control or replace CAN-Cable

Control if all CAN-Participants are swit-
ched on
Permanently W
33