Eco ETS Series, Руководство пользователя

Страница: 32 / 36

Safety elements
No. Description Cause Solution Testing time Reaction
E20 01 SER Test SER Test signal unsuccessful  SER short against ground

Check wiring of sensor or bridge
Before closing A
02 SER too slow  SER reacts too slow

Check wiring of the sensor
 Check for reverse polarity of test signal
E21 01 SES Test SES Test signal unsuccessful

SES short agains ground
 Check wiring of sensor or bridge
Before opening A
02 SES too slow  SES reacts too slow

Check wiring of the sensor

Check for reverse polarity of test signal
E22 01 EMY Test EMY input to 24V

Check EMY bridge

Check wiring on EMY
Permanently H
Power supply
No. Description Cause Solution Testing time Reaction
E30 01 30 V Error 30 V too low  power failure

Motor overload

Check power supply
 Replace hardware
Permanently A
02 30 V too high
03 Error when switching on
E31 01 24 V General Error when switching on Overload, short of the 24V-inputs
(exclusive electric lock, Safety Elements)
Permanently A
Restart after
10 s.
02 Overvoltage / Undervoltage
E32 01 24 V Safety Overvoltage / Undervoltage Overload, short of Safety Elements Permanently A
Restart after
10 s.
E33 01 24 V E - Lock  Error

Overvoltage / Undervoltage
Überlast, Kurzschluss Elektroschloss Permanently A
Restart after
10 s.
02

Early warning

Overvoltage / Undervoltage
E34 01 24 V CAN Overvoltage / Undervoltage Overload, short of external supply CAN Permanently A
Restart after
10 s.
ERROR CODES
(DISPLAY)
FAILURE WITH ERROR NUMBER
ECO ETS – Assembly Buddy
32