Eco ETS Series, Руководство пользователя

Страница: 27 / 36

Parameter Description Setting range Default
DubleD Roll for closing sequence control (Master/Slave) and Sluice-side (A/B) OFF
MastrA
SlaveA
MastrB
SlaveB
OFF
AoSeq Opening sequence delay angle (slave)
(only visible if DoubleD is active)
0…110 ° 20 °
AcSeq Closing sequence delay angle (Master)
(only visible if DoubleD is active)
0…110 ° 20 °
InterL Sluice OFF
SideA
SideB
OFF
ILAuto Sluice operating mode AUTOMAT
(only visible if InterL is active)
Inacti
Active
Active
ILExit Sluice operation mode EXIT
(only visible if InterL is active)
Inacti
Active
Active
ILNigt Sluice operating mode NIGHT
(only visible if InterL is active)
Inacti
Active
Active
ILType Safety: Two doors work as a sluice (in all operating modes). The second door only opens if the
first one is closed. Has to be set on both doors.
Spital: Automatic sequence -> When an opening command is given, the door that receives
the the opening command is opened. After this door is closed again, the second door
opens automatically.
NL: The second dor only opens if the first one is closed or when the override time runs out.
Safety
Spital
NL
Safety
TOverd Only visible in ILType NL
When the override time runs out, the sluice function is cancelled. As soon as both doors are
closed, the sluice function is switched on again.
OFF
1…60s
OFF
RdrOEI OFF: Radar OEO/OEI switches normally, door closes when both are inactive.
ON: With OEO the (OEI) radar inside the sluice is masked out, so that it won’t hold oben
the door in tight sluices.
OFF
ON
OFF
ILCdRc Acitve: The opening commands are buffered and executed when the second door is closed.
Inactive: The opening commands are only accepted and executed as soon as the second door
is closed.
Active
Inacti
Active
SETTINGS
MULTI-LEAF SYSTEMS
(DOUBLE DOOR)
27