Eco ETS Series, Руководство пользователя

Страница: 26 / 36

Parameter Description Setting range Default
Vo Velocity open (velocity open) 0…14 (5…50 °/s) 6
Vc Velocity close (velocity close) 0…14 (5…0 °/s) 4
TOEx Hold open time opening element inside / outside (time hold opening element inside/outside) 0…60 s 3 s
TKey Hold open time Key (time hold opening element Key) 0…180 s 5 s
TDelay Start-up delay (time delay lock) 0,0…4,0 s 0,2 s
FDelay Relief force when unlocking (force delay), only works if TDelay is >0. 0,0…7,0 A OFF
TLock Door hold-up time (time press close) 0,0…4,0 s 0,5 s
FLock Pressing force while locking (force lock), only works when TLock is >0. 0,0…7,0 A 2,0 A
FSlam Slam function (force slam) 0…10 OFF
FWind Obstacle detection optimised for external doors. (force wind) OFF
OPEN
CLOSE
BOTH
OFF
Fo Opening force (force open) 0…9 4
Fc Closing force (force close) 0…9 4
Foh Hold open force (force open hold) 0…9 0
Fch Locking force (force close hold) automatically sets FLock and FDelay if they are 0 0,0…3,5 A 0
Ao Opening angle of the door (angle open)
If the opening angle is changed in the OPEN mode, the operating mode must be changed to
HAND to close the door.
20…(190 °) Rod dep. 95 °
*
Rod Linkage types (Rod) Standard arm pressing
Sliding rail pulling
Sliding rail pushing
Leaf mounting pushing
Without linkage pushing
Without linkage pulling
STD - PH
SLI - PL
SLI - PH
WIN - PH
DIR - PH
DIR - PL
STD - PH
*
Invers Inverse-Application: In case of power failure / error, the door leaf is opened from any position
by spring force (if not locked). Position of the motor plug is reversed to the standard drive. The
electric lock / holding magnet must be connected in reverse to the standard drive (see wiring
diagram E4-0141-713).
OFF
ON
OFF
*
dAxis Distance between door hinge rotation axis and the drives mounting level (distance Axis). dAxis
is a guide value. Depending on the mounting situation, dAxis must be adapted accordingly.
-8…+25 cm
Rod dep.
0 / +8 cm
Rod dep.
*
Fos Limitation of the opening force.
Must not be increased in Germany!
5…14 A 5 A
*
Note: A new set-up process (Teach) is required.
SETTINGS
DRIVE PARAMETERS
(PARAMETER)
ECO ETS – Assembly Buddy
26