Eco ETS Series, Руководство пользователя

Страница: 30 / 36

Drive
No. Description Cause Solution Testing time Reaction
E1 03 Encoder Canal A + B lost  Check encoder connection

Check motor cable

Rotation direction of the motor doesn’t
correspond with the linkage.

Door is blocked
 Check if the Jumper is on X106
While driving H
04 Short of A + B
05 Disruptions
06 Motor wire plugged wrong Before starting
07 No canal A
08 No canal B
09 No canal A + B
10 Short of A + B
E2 01 Motor power Power too high  Check motor cable

Check if the Jumper is on X106
Before starting H
02  Power too low

Jumper missing
E3 01 Damping Test failed once  Set drive to operating mode HAND and
cauiously try if the door closes with
damping.

If not, replace hardware

If yes, check/correct friction of the door
leaf and the closing spring preload.
Before closing,
after starting up
and then every
24 hours.
W
02

Test failed twice

Damping defective or opening
beyond heart curve peak
Drive conti-
nues running,
buzzer active.
E4 01 Reference
switch
Detected in open-position

Check the connection and switching point
of the refernece switch.

Reference switch must be actuated in
closed position (switching contact open).
Open position F
02 Not detected in closed-position Before the first set
up ride
A
03 Not detected in open-position
E5 00 Power limitation

Overload of the control

Maximum power is limited

Check/correct friction of the door leaf and
the closing spring preload.
Permanently A
ERROR CODES
(DISPLAY)
MISBEHAVIOUR WITH ERROR-NO
ECO ETS – Assembly Buddy
30