Eco ETS Series, Руководство пользователя

Страница: 31 / 36

Operating
No. Description Cause Solution Testing time Reaction
E10 01 Fullteach
required
Parameter Ao, Rod, Invers
or dAxis changed
Proceed Teach When changing
the drive configu-
ration
H
02 Minimum opening angle
not reached
Check locking / electronic lock During the Teach
E11 01 Halfteach
required
(Opening)
Parameter Vo changed Proceed complete, unobstructed
opening cycle
When changing
the ride parame-
ters
W
02 Halfteach
required
(Closing)
Parameter Vc or FSlam chan-
ged
Proceed complete, unobstructed
closing cycle
E14 01 Locking /
Electronic lock
Door leaf stucks in the locking /
electronic lock.
Check function of locking / electronic lock When opening
from close-
position
H
02 Inverse-operation has no
locking or locking force Fch is
not adjusted
Adjust/increase locking force At the end of the
Teach
W
E15 01 Obstacle in ope-
ning direction
Too many obstacles encounte-
red in a row
 Check system

Remove obstacle

Move door leaf to target position
Permanently H, A
Restart after
60 s
02 Obstacle in
closing direction
E16
01 Temperature Temperature on output range
has reached 81° C
Observe the limits of use. Permanently A
Drive running
reduced
02 Temperature on output range
has reached 91° C
A
Drive stands
still
31