Eco Heating Systems CB 105 HW, Инструкция по установке, обслуживанию и эксплуатации

Страница: 10 / 147

E93.1803.901 HW 11
3 TECHNICAL DATA HW WATER HEATERS
Functional introduction
The HW water heaters are water heaters with a maximum high efficiency. Such a performance can be reached
by, amongst other things, using a special heat exchanger made of stainless steel. This allows the flue gases to
cool down below the condensation point, and so release extra heat. This has an immediate positive impact on the
efficiency.
The water heater is set for Natural gas.
Fuel used should have Sulphur rates with a maximum annual peak over a short period of time of 150 mg/m
3
(110
ppm average) and an annual average of 30 mg/m 3 . (22 ppm average)
Water heater control includes:
▪
Cascade control for up to sixteen water heaters
▪
Remote operation and heat demand indication from each water heater
▪
Anti-
Legionnaires’ disease function.
Connections for:
▪
Water heater pump
▪
PWM control for external water heater pump.
▪
System pump
▪
External flow switch or external safety device.
▪
Modbus
▪
External system sensor
▪
DHW sensor.
▪
External Ignition coil
Location of version numbers
Parameter Version
- To be found on the small sticker on the side of the
burner controller.
v.A
= “Version A” e.g
Burner Controller Hardware Version
– To be found on the second line of the white sticker
on the side of the burner controller.
e.g. 957MN25_3Rh4b
Burner Controller Software Versions
– Press the menu button , go to Information and then to Software Versions.
Information
Software Versions
Boiler Status
Boiler History
Error Log
i
Software Versions
Display [63EF 83BC]
Boiler [5C79 14A9]
Device Group 900MN