Eco Heating Systems CB 105 HW, Инструкция по установке, обслуживанию и эксплуатации

Страница: 139 / 147

E93.1803.901 HW 140
Use “DHW Store Setpoint” to set the Hot Water temperature
If you are inside the menu (or a menu item) and want to return directly to the Status overview press
MENU or ESC If you want to go back one step in the menu press BACK/LEFT
← .
Changing the Setpoint DHW.
This can be done directly via the Status overview (as shown below) or via the MENU.
You can adjust the DHW setpoint directly on the bottom of the Status overview.
23.1.2 S
ET
A
CTUAL SETPOINT
/DHW
SETPOINT DIRECTLY VIA THE
S
TATUS OVERVIEW
You can adjust the DHW setpoint directly on the bottom of the Status overview.
Press UP/DOWN ↑↓ to select the mode, then press CONFIRM or RIGHT → to confirm the mode and the
Actual/DHW
setpoint becomes directly settable. Use UP ↑ or DOWN ↓ to increase/decrease the setpoint.
Press CONFIRM or RIGHT → to confirm your alteration or press ESC or LEFT ← to cancel.
A setpoint is only visible on the display when no error or alert is active. In case of an active error or alert, the bottom
right part of the display is used to display the error or alert text.
23.1.3 C
HANGING THE
DHW
SETPOINT DIRECTLY
.
Only applicable if this function is available.
Press the UP or DOWN button to select the mode:
57.0 °C is just an example of a possible temperature value.
Use the left/right buttons to move the sign to the front of the temperature digits.
Use UP/DOWN buttons to increase/decrease the setpoint.
Press the ENTER or RIGHT button to confirm your alteration or press the BACK or LEFT button to cancel.
A setpoint is only visible on the main screen when no error or alert is active. In case of an active error or alert, the
bottom right part of the PB screen is used to display the error or alert
DHW Store Setpoint 57.0 °C
DHW Store Setpoint 50.0 °C
Domestic Hot Water (DHW)
DHW Store Setpoint 50.0°C