![background image](http://html.mh-extra.com/html/echo/tm-2000/tm-2000_technical-manual_532389036.webp)
32
U
SING THE
R
OBOT
S
ERVICE
M
ENU
7.5.5 Device
Use this menu to display the characteristics of the
device and change the robot’s name.
By default the name of the robot corresponds to the
serial number.
To change the name of the robot:
1)
Press .
2)
Press the arrow keys to highlight
Device info
,
then press
.
3)
Highlight
Robot name
and press
.
4)
Highlight the back arrow to delete the current
name.
5)
Use the alpha-numeric keyboard to enter the
new name. Highlight each character required
and press
to select it.
6)
Highlight
V
in the bottom row and press
.
7)
Press
to accept the new name.
8)
Press
to return to the main menu.
7.5.6 Device info
To see the device info:
1)
Press .
2)
Press the arrow keys to highlight
Device
then
press .
3)
Highlight
Device info
and press
.
4)
Press
or
to scroll through the list.
Robot name
The name of the robot.
Serial number
Serial number of the robot.
Latitude
Current latitude of the robot position.
Longitude
Current longitude of the robot position.
Visible satellites
Number of satellites that the device can currently
detect.
Lat [GF center]
The current latitude of the center of the Geofence
security zone.
Long [GF center]
The current longitude of the center of the Geofence
security zone.
Radius
Current radius of the Geofence security zone.
Dist. to beacon
This option is not used in North America.
DW board not installed
This option is not used in North America.
Magnetic distance
The distance between the robot and the peripheral
wire.
This value should be positive when the robot is inside
the peripheral wire loop. If the distance is shown as a
negative value, it is necessary to reverse the phase. See
Infrastructure > Peripheral wires > WireCH#
from the
technician’s menu.
MAC address
MAC address.
7.5.7 System version
To see the System version information:
•
Press .
•
Press the arrow keys to highlight
Device
, then
press .
•
Highlight
System version
, then press
.
•
Press
or
to scroll through the list.
X
DRAFT
05-23-2019